AXC-EC
Available in sizes 315 – 800 mm
Motors up to 15 kW
Motors exceed IE5 efficiency levels in accordance with IEC 60034-30-2
Ready for Ecodesign regulation 2026
Can be installed in any position
Integrated control
Flexibility
On request AXC fans can be customized with the following options:
Wide range of accessories
Various coating colors
Special motor versions e.g. up to 100°C, with corrosion protection C5 or for other voltages
FAT for projects
Noise reduction AXC-Box can be used
Casings of stainless steel or shorter casings
Different positions for the terminal boxes
X-ray tested blades and hubs
Application
The AXC provides effective extraction in operating temperatures up to 55°C continuously for various applications. Variants for continuous operation up to 80°C available on request.
Performance
The fan can be configured to suit the individual operating point. Therefore, the pitch angle is adjusted in the factory. This provides a wide range of performance and high flexibility in the selection. A guide vane is available for higher pressure and efficiency.
Sturdy and dependable design
Corrosion-proof aluminum impellers, IE3 high-efficiency motors and a hot-dip galvanized steel casing ensure high quality and a long life time.
Tested according to ISO 5801 and AMCA 210
The AXC axial fans have been performance tested in accordance with ISO 5801 and AMCA 210 standards on the Systemair or AMCA fan test rig. To select AMCA certified fans check the axial fan configurator.
High efficiency
Equipped with a high-efficiency motor comparable to IE5 standards, the unit ensures low operating costs and optimised energy performance. It is prepared to meet the requirements of the 2026 Ecodesign regulation, providing a future-proof and sustainable solution.
)
Easy to control
AXC - EC features an integrated control for straightforward operation and efficient performance management. It is equipped with a built-in potentiometer. In addition, an integrated relay provides clear operating and alarm signals, enabling reliable system monitoring.
)
Easy for the planet
AXC-EC fans are equipped with a high-efficiency EC motor, delivering performance exceeding the IE5 efficiency class (according to IEC 60034-30-2). AXC-EC is ready for the Ecodesign regulation 2026 (2024/1834), making AXC a future-proof choice for demanding ventilation applications.
)
Easy for you
Designed for maximum flexibility, the fan can be installed in any position and is suitable for outdoor installation (IP55 motor, IP65 controller) in a wide range of applications. Selection is equally easy, thanks to the axial fan configurator, which automatically identifies the optimal combination of motor and impeller for each project.
)
The perfect match!
Systemair Accessories
Save time in design and installation while ensuring the most optimal ventilation solutions for your project.
)
21% lower energy consumption
At the same operating point of 16,000 m³/h and 240 Pa static pressure, the AXC-EC demonstrates a clear efficiency advantage. Compared with the existing AXC equipped with an AC motor, the EC version reduces energy consumption by 21%.
Based on an assumed operating time of 2,000 hours per year, the AXC-EC consumes 3,844 kWh annually, while the comparable AXC with an IE3 motor requires 4,873 kWh – resulting in significantly lower energy consumption and operating costs.
)
Easy to make the right choice
See AXCP-EC in our Axial configurator
Configure customised axial fans in just a few steps to match your customer’s demands