Log in

An error occured while logging in. Please try again later. ×
Inloggningen misslyckades

Ansök om konto

För att kunna handla i e-handeln måste du vara kund hos Systemair. Är du redan kund kan du enkelt registrera dig och ansöka om ett konto.

Ansök om att bli kund

Vill du bli kund hos oss och ta del av vårt breda sortiment av ventilationsprodukter.

Den här produkten har utgått ×

DVC 630-POC
Artikelnummer: 32960  Vikt: 0 gram  Volume: 0 l  Tullstatistiknr:

Skapa PDF
  • Integrated pressure sensor, independent from power
  • Temperature sensor for outdoor temperature compensation 
  • Multipurpose LC display and keyboard
  • 100 % speed controllable
  • Integrated motor protection
  • Safe and maintenance free operation
  • Energy-saving
  • Sizes 315 up to 500 include a tilting device for service options
  • Alarm relay(2A, 250VAC)

 

The DVC-POC roof fans are driven by EC- external rotor motors, so called energy saving motors with high efficiency. The input voltage for single phase units can vary between 200 and 277V, for three phase units between 380 and 480V. All motors are suitable for 50Hz and 60Hz and from size 355 up to 630 suspended on effective vibration dampers. Motor protection is integrated in the electronics of the motor, no additional external motor protection device is needed.  

 

The DVC-POC versions have integrated pressure sensors and temperature sensor for outdoor temperature compensation. The electronics could be programmed for a pressure constant operation or pressure constant operation with outdoor temperature compensation. The factory setting is pressure constant operation with outdoor temperature compensation. All set point adjustments over the keyboard and all values were shown on the LC display. The purpose of the controller is to reach and maintain the target values set. To accomplish this, the measured actual value (sensor value) is compared with the adjusted target value, and the controlled value (modulation) is deduced from this.

 

Casing from seawater-resistant aluminum, base frame from galvanised steel. Backward curved impellers manufactured from polyamide PA 6 for size 315. From 355 up to 630 impellers manufactured from seawater resistant aluminium.

 

 

{{price}}
({{listprice}})

Antal
 
Kontrollera tillgänglighet Finns i lager
Skickas tidigast {{earliestdelivery}}
Visa leveransmöjlighet Dölj leveransmöjlighet

Datum
Antal
 
{{p.Quantity}} {{settings.commerce.stats.Unit}}
{{p.When}}
Kontrollera leveransmöjlighet

Ange datum och antal till höger för att kontrollera lager och leveransmöjlighet av produkten.

Produkter i samma serie

×
×
×
×
×
×
×