This product is discontinued ×

DVG-V 630D4-8-S/F400
Numar articol: 32328  Weight: 0 gram  Volume: 0 l  Customs statistics no.:

  • Smoke and heat extract unit + normal ventilation
  • Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
  • Normal ventilation up to 120°C continuous operation
  • Vertical exhaust
  • Service switch serial
  • Suitable for coastal applications
  • Wide range of accessories
  • Tested acc. to EN 12101-3 at LGAI, Barcelona
  • CE-certified acc. to EN 12101-3, 2002-06 at TÜV Süd


The DVG smoke extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation.


Smoke-free escape ways increase the chances to rescue people in case of a fire. For installation only on top of heated buildings.


The casing is manufactured from seawater resistant aluminium. The base frame consists of galvanised steel. The impeller with backward-curved blades is manufactured from galvanised steel.


Motor outside air stream of IE1 standard efficiency is cooled with fresh air. Thermal motor protection on request (PTC or thermal contact). For frequency controlled units PTC must be ordered. For two speed fans (up to 4 kW) two speed switch is available as accessories (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch, frequency inverter and all protective devices must be bridged to guarantee functional capability (connection direct to mains). At frequency controlled units additional EMC protection could be needed (on request).


Note: in case of dual use (normal ventilation + smoke and heat extract) of single speed fan with nominal power 0,75 kW or more EU legislation requires IE2 high efficiency motors; these items are marked with DVG.....IE2!


Check availability Is in stock
Earliest delivery {{earliestdelivery}}
Open Close

{{p.Quantity}} {{settings.commerce.stats.Unit}}


Produse din aceeasi serie