AXC Axial Fans

Medium pressure axial fan

  • Configurable in the Axial Fans Configurator

  • Performance tested


The AXC provides effective extraction in operating temperatures up to  55°C continuously for various applications.


The fan can be configured to suit the individual operating point. Therefore, the pitch angle is adjusted in the factory. This provides a wide range of performance and high flexibility in the selection. A guide vane is available for higher pressure and efficiency.

Sturdy and dependable design

Corrosion-proof aluminum impellers, IE3 high-efficiency motors and a hot-dip galvanized steel casing ensure high quality and a long life time.


On request AXC fans can be customized with the following options:

  • Wide range of accessories

  • Various coating colors

  • Special motor versions e.g. up to 100°C, with corrosion protection C5 or for other voltages

  • FAT for projects

  • Noise reduction AXC-Box can be used

  • Casings of stainless steel or shorter casings

  • Different positions for the terminal boxes

  • X-ray tested blades and hubs

Tested according to ISO 5801 and AMCA 210

The AXC axial fans have been performance tested in accordance with ISO 5801 and AMCA 210 standards on the Systemair or AMCA fan test rig. To select AMCA certified fans check the axial fan configurator.

Systemair Accessories – the perfect match!

Save time in design and installation while ensuring the most optimal ventilation solutions for your project.

Featured accessories for your AXC-fan

FSD-AXC, Spring damper for AXC fans
Spring damper for AXC fans
MFA-AR/AXC, Mounting feet for axial fans
Mounting feet for axial fans
EV-AR/AXC, Flexible connector for axial fans
Flexible connector for axial fans


The casing is made from hot-dip galvanised steel according to ISO 1461 with pre-drilled flanges.


The impellers are made of aluminum and are dynamically balanced in accordance with ISO 21940-11, balancing quality G6,3, and vibration limits according to ISO 14694.


Standard models are driven by three-phase AC motors with efficiency IE3 suitable for 50Hz and optionally for 60Hz.

Motor protection

The motors are equipped with PTC thermistors for motor protection.


Motors can be speed controlled by frequency inverter between 25 and 60 Hz.


The AXC fans can be installed in different positions indoor and outdoor (for more information see the manual).

Recommended accessories: flexible connections, vibration dampers, mounting feet.