X-Cirrus-3000-2-2 Chilled Beam
Weight: 0 gram
Volume: 0 l
Customs statistics no.:
Cirrus 120 - 300
• Cirrus chilled beam for flushmounting in false ceilings
• Adapted for standard 600 mm false ceilings module
• Available with the following functions:
heating, comfort, control, NCS (Nozzle Control System), RCS (Room Comfort Support).
Cirrus is chilled beam and integrates ventilation, cooling and heating. It covers a wide range of supply air and assures you the best room comfort. It is supported with
a nozzle technology NCS (nozzle control system) that gives you the highest induction rate and fl exible air pattern.
Together with RCS (room comfort support), it helps you to have a good indoor condition by directing the air so it will create low air velocities in the occupied zone.
Cirrus is available in length of 120, 180, 240 and 300 mm and adapted to false ceilings with a module of 600 mm.
Material and surface finish The casing is mainly made of galvanized steel sheet. The frontplate is powder painted in white.
The standard colour RAL 9010 corresponds to NCS 0502-Y, gloss level 30.
The coil made of copper tubes (thickness 1 mm) and aluminium fi ns, connection size is 1/2" male.
Maximum working pressure 1.6 MPa.
Cirrus, can be attached with standard M6 suspension rods.
ARGUS, control system for Systemair's Chilled Beams.
This system includes room control unit, valve and actuator in different versions.
For more information, look at separate product sheet for ARGUS.